Make with Karkhana

Hey Folks, In this tutorial, we will learn, how to change the colour of RGB LED using accelerometer of the ARM (FRDM-KL25Z). INTRODUCTION The FRDM-KL25Z is an ultra-low-cost development platform for Kinetis L Series KL1x (KL14/15) and KL2x (KL24/25) MCUs built on ARM® Cortex™-M0+ processor.  The FRDM-KL25Z has been designed by NXP in collaboration with mbed for prototyping all sorts of devices, especially those requiring the size and price point offered by Cortex-M0+ and the power of USB Host and Device. The FRDM-KL25Z is supported by a range of NXP and third-party development software. It is packaged as a development board with connectors to break out to stripboard and breadboard and includes a built-in USB FLASH programmer.               FEATURES NXP KL25Z Kinetis KL2x MCU (MKL25Z128VLK4) High-performance ARM® Cortex™-M0+ Core 48MHz, 16KB RAM, 128KB FLASH USB (Host/Device) SPI (2) I2C (2) UART (3) PWM (TPM) ADC (16 bit) DAC (1x 12bit) Touch Se

In this tutorial, we will learn how to interface DC Motor with NodeMcu by using Relay Module controlling with Alexa echo. with voice API. A DC motor is any of a class of rotary electrical machines that converts direct current electrical energy into mechanical energy. The most common types rely on the forces produced by magnetic fields. SmallDC motors are used in tools, toys, and appliances. DC Motor (Overview)  There are 4 main types of DC motors: Permanent Magnet DC Motors. The permanent magnet motor uses a permanent magnet to create field flux. Series DC Motors. In a series DC motor, the field is wound with a few turns of a large wire carrying the full armature current. Shunt DC Motors. Compound DC Motors. So now we are familiar with the motor let us interface it. Components Required: DC motor NodeMcu(ESP8266) Alexa echo. Connecting wires(male to male) Breadboard Relay Module Follow the Image below for circuit connection reference:- (Interfacing all

MQ-5 Module(Overview ) In this tutorial, will learn, how to interface MQ-5 Module with Node Mcu(ESP8266). The Grove - Gas Sensor(MQ5) module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer. MQ-5 Module(backside) Components Required NodeMcu(ESP8266)  MQ-5 LPG SENSOR Module  Few male to female connecting wires  Breadboard  Follow the image below for circuit connection reference:- In this circuit, we have connected the A0 pin of the MQ-5 to the A0 pin of the NodeMcu module and D0 pin remain disconnected. After making the circuit dump the code given below:- // Karkhana Report // Analyse the volume of the gas using thingspeak.com // Hardware: NodeMCU,MQ-5 #include <ESP8266WiFi.h> String apiKey = "Enter the API key

Hey Folks, In this tutorial, we will learn, how to interface DHT 11 with Node Mcu(ESP8266 ).   The  DHT11  is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). DHT11 Back Side DHT11-Internal Sensor Components Required NodeMcu(ESP8266)  DHT 11 SENSOR  Few male to female connecting wires  Breadboard Follow the image below for circuit connection reference. DHT11 Sensor connection with NodeMCU(WiFi-Module) In this circuit, we have connected the output pin to the D3 pin of the NodeMcu module and NC pin remain disconnected. After making the circuit dump the code given below. // Karkhana Report // temperature and humidity data using thingspeak.com // Hardware: NodeMCU,DHT11 #include <DHT.h> // Including library for dht #include <ESP8266WiFi.h> String apiKey = "TH