Make with Karkhana

Hey Folks, In this tutorial, we will learn, how to change  the intensity of light using touch sensor the ARM (FRDM-KL25Z). INTRODUCTION The FRDM-KL25Z is an ultra-low-cost development platform for Kinetis L Series KL1x (KL14/15) and KL2x (KL24/25) MCUs built on ARM® Cortex™-M0+ processor.  The FRDM-KL25Z has been designed by NXP in collaboration with mbed for prototyping all sorts of devices, especially those requiring the size and price point offered by Cortex-M0+ and the power of USB Host and Device. The FRDM-KL25Z is supported by a range of NXP and third-party development software. It is packaged as a development board with connectors to break out to stripboard and breadboard and includes a built-in USB FLASH programmer.               FEATURES NXP KL25Z Kinetis KL2x MCU (MKL25Z128VLK4) High-performance ARM® Cortex™-M0+ Core 48MHz, 16KB RAM, 128KB FLASH USB (Host/Device) SPI (2) I2C (2) UART (3) PWM (TPM) ...

Hey Folks, In this tutorial, we will learn how to interface a Seven Segment Display with ARM(FRDM-KL25Z). Components Required FRDM-KL25Z board Seven Segment Display (Common Cathode) Breadboard Mini Jumper Wires (As Required) FRDM-KL25Z         2. Seven Segment Display        3. Breadboard Mini         4. Jumper Wires (Male to Male)   Follow the Image below for circuit connection reference:-  (Interfacing all components) After making the circuit dump the code given below:- #include "mbed.h" BusOut display(PTA1,PTA2,PTD4,PTA12,PTA4,PTA5,PTC8,PTC9); int main() {          while (1) {                 display= 0xBF ;         wait( 1 );         displa...